Frequently Asked Questions to Single Metal Carports

If you are confused by questions related to single metal carports, you are in the right place. Here is a quintessential guide to metal carports. So, are you ready to know the discussion? Have a quick look:

What carport height should we order?

When ordering, it is essential to consider that the height is described as the lowest point near the sides of the carport. If you need a particular clearance for your vehicle or anything else you put under the carport, garage, or barn, you must verify that requirement before ordering.

You may understand it with an example, if you order a 12′ wide structure with 5′ side wall leg heights, the center clearance will be 7’3″ and the peak height will be 7’9”. Note, the peak height is not the allowance for a vehicle; it is only the highest point of the structure. The clearance for your vehicle is typically the height of the side legs.

What are the dimensions a manufacturer can list? How should we read them?

Usually, the manufacturers list the building dimensions as Width x Length x Height. Like one of the carports, models are listed as 12x21x5. This is indicated that it is 12 feet wide, 21 feet long, and 5 feet tall. This implies that you can fit one standard car in the space provided. Please remember that the roof of every structure is always 1' longer than the base due to 6" overhang on each end of the roof.

What do we need to do to prepare our site to make it ready for the day of the metal carport install?

In order to provide you with the highest quality carport at the lowest installed price, you must prepare your site to be ready for a metal carport installation. So, make sure that the location of the carport is ready before the installers arrive. What kind of preparations you need. The surface should be flat and accessible with all building permits including, but not limited to, homeowners association approvals and county or city set-back restrictions. 

What about single metal carport prices?

The prices of the metal carport depend on various factors for example, what dimensions you are choosing. Or what is the size you need for a metal carport? These two things play a vital role in deciding the prices of a metal carport. Other than that, the material you will choose for the carport will also be a factor to contribute to deciding the prices. 

What are Certified buildings and why should we choose them?

Certified buildings are engineered to meet specific snow and/or wind load. Many areas across the country, especially in the northeast and along the coastal regions, need that the buildings satisfy particular wind or snow load. You should be aware of your area’s needs and buy a structure that satisfies the wind and/or snow load requirements for your state. Choosing such kinds of buildings will enable you to utilize the best benefits of carport for a long time.